Kivorent News

Wednesday, November 18, 2026

Health techExplainer

How cuffless blood pressure wearables work, and why they need a cuff

Cuffless blood pressure watches, rings and bands estimate pressure from the shape and speed of your pulse, and most must be calibrated against an ordinary cuff first.

Pulse, covering wearables and health sensors
, 3 min read

±5 mmHgaverage error a cuff monitor may have under ISO 81060-2

What to know

  • A cuff measures blood pressure by squeezing the artery; a cuffless wearable infers it from the pulse wave its optical sensor sees.
  • Most cuffless devices start from a cuff reading and track changes from that baseline, so they need recalibration.
  • Some products give readings, while others only flag a pattern that suggests high blood pressure (hypertension).

Blood pressure is written as two numbers in millimeters of mercury (mmHg): the peak during a heartbeat (systolic) and the low point between beats (diastolic). It has long been measured by squeezing the arm. A growing number of watches, rings and bands now estimate it without a cuff, indirectly.

How a cuff does it

A home monitor inflates a cuff until it stops blood flow in the upper arm, then lets the air out slowly. As pressure drops, blood starts pushing through the artery again and the cuff picks up small oscillations. Software converts the pattern of those oscillations into systolic and diastolic numbers.

What a cuffless device measures instead

A wearable cannot squeeze, so it watches the pulse. Most use the same green or red lights that track heart rate, a method called photoplethysmography (PPG). Each heartbeat sends a wave of blood through the arteries, and the light reflected from the skin rises and falls with it.

Two features of that wave carry information about pressure:

  • Shape. The pulse wave has a main peak and smaller bumps caused by the wave reflecting back from other parts of the body. Higher pressure and stiffer arteries change the timing and size of those bumps. Models are trained to map that shape onto readings.
  • Speed. A pressure wave travels faster through a stiff, tightly stretched artery. Some devices time how long the pulse takes to arrive, often by pairing an electrical heartbeat signal from an ECG sensor with the moment the pulse reaches the wrist or finger. A shorter delay generally means higher pressure.

Neither signal is blood pressure itself, and both vary between people with artery stiffness, age, skin and sensor position.

Why most still need a cuff

Because the link between pulse and pressure varies from person to person, most cuffless devices begin with calibration. You take readings with a standard cuff while wearing the device, and the wearable learns your baseline. From then on it estimates how your pressure has moved relative to that starting point.

That relationship drifts over weeks and months, so many products ask users to recalibrate against a cuff on a schedule. Readings can also shift with posture and with how high the wrist or finger sits relative to the heart, which is why some products take measurements mainly at rest or during sleep.

Readings versus alerts

Cuffless products fall into two broad groups. Some report systolic and diastolic numbers, like a cuff. Others never show a number; they analyze weeks of pulse data and notify the wearer if the pattern looks like possible hypertension, with a suggestion to confirm it with a cuff.

Either way, a blood pressure claim makes the product a medical device in the FDA's view. The agency warned Whoop in 2025 that estimating blood pressure needs review even with a wellness disclaimer, and products such as the Hilo band and the Happy Ring went through clearance. The difference between cleared and approved is covered in our FDA explainer.

How accuracy is judged

Cuff monitors are usually validated under the ISO 81060-2 standard, which, among other things, requires that the average difference from a reference measurement be within 5 mmHg, with a standard deviation of no more than 8 mmHg. That test was designed for single readings taken at one moment. Cuffless devices that track change over time raise harder questions: does the device follow a real rise or fall, and does it stay accurate weeks after calibration? Newer standards such as IEEE 1708 and ISO 81060-3 try to address this, and researchers continue to argue over how strict the tests should be.

Large studies are also testing whether everyday devices can screen for hypertension at scale, such as Google's smartwatch study published in Nature.

Why it matters

High blood pressure often causes no symptoms, and a single clinic reading can miss or exaggerate it. Many readings in ordinary life could catch more cases and show trends. But a cuffless number is an estimate built on a cuff's baseline, not an independent measurement. Knowing that helps make sense of the product claims, the calibration prompts and the regulators' interest.

This article is general information about how technology works. It is not medical advice. Talk to a clinician about your own health.

Heart health techWearablesSmart ringsFDA and health regulation

Written by an AI correspondent under standards set by editor Jacob Knight. Spotted an error? Tell us and we will fix it.